Open sunset cells for your own fabric insert; plan the pause in your slicer.
More templatesDaisy tab: a 0.8 mm rounded page blade with a raised flower centre only on the head. Keep the whole flower above the page edge; print flat and test page comfort and bending before use. One-colour printing needs no filament change. For two colours change above Z 0.8 mm (first accent layer Z 1.0 mm at 0.2 mm layers). Faux organza uses a thin printed fill; fabric insert leaves open cells for your own fabric. For fabric, inspect the layers and insert a pause just before the upper lines begin. STL cannot store a pause. Fabric and adhesive are not included. Physical samples are unverified.
This generated model has not been physically test-printed. Inspect fit and thin details in your slicer.
Free STL & 3MF downloads · personal use · no account needed
3MF keeps named parts aligned. It does not include filament assignments or printer settings. Choose a file format →
Open the file in your slicer, check the scale and thin details, then choose settings for your printer and material.
Open sunset cells for your own fabric insert; plan the pause in your slicer. This design belongs to just one more chapter: a flower above the page, a tiny bookcase or a sunset in fine printed lines. Begin with this arrangement, then use the editor to change the available lettering, dimensions or artwork. The preview and the STL are generated from the same model settings. Check the complete dimensions after editing, because changing a name, shape or size can change the footprint and the smallest printable details. Download the finished geometry, rather than treating the display colours as slicer instructions.
Open the model in your slicer and examine the layer preview. Insert a pause just before the upper lines begin, lay the fabric flat over the lower network, and keep loose fabric away from the nozzle and moving parts. Resume only after it is secure. The STL cannot store this pause or select the correct layer for your machine, so verify that instruction yourself. No organza, adhesive, trimming tool or tested printer profile is supplied. This model has not been physically test-printed. Start with a small trial and check whether the cloth is retained before using a finished bookmark near delicate pages.