06 / YOUR OWN OUTLINE
Trace your own outline into a cutting wall, grip flange and optional detail stamp.
Uses the largest outer contour. The optional stamp is an inset outline impression. Inspect narrow features before printing.
This generated model has not been physically test-printed. Inspect fit and thin details in your slicer.
Free STL & 3MF downloads · personal use · no account needed
3MF keeps named parts aligned. It does not include filament assignments or printer settings. Choose a file format →
Open the file in your slicer, check the scale and thin details, then choose settings for your printer and material.
FROM PREVIEW TO PRINT
Turn a silhouette into a cutting wall with a wider grip flange. Start from a filled SVG or a high-contrast image and optionally create a separate inset-outline stamp. The generator uses the largest exterior contour; it is not a complete illustration-to-stamp tracing service. This tool creates digital geometry and makes no food-contact safety claim for a printed object, material or printing process.
Separate the geometry decision from the intended contact material. PLA layer lines and surface defects can harbour bacteria, and a suitable filament label does not establish the safety of the printer, finished surface or cleaning method. Use a food-safe process appropriate to the application; when that cannot be established, choose a purpose-made food-contact tool. For early design trials, use a non-food craft material and check narrow corners, wall continuity and release. Keep those craft tools separate from food utensils. The model preview cannot assess hygiene, durability or compliance. It also cannot tell whether a particular dough will release cleanly from an intricate outline.
These are model settings to test, not a validated printer profile. Check the result with your own material, nozzle and slicer.
| Setting | Start with | Why |
|---|---|---|
| Target size | 70 mm | A manageable starting footprint. |
| Cutting wall thickness | 0.8 mm | Compare with the actual extrusion widths in your slicer. |
| Wall height | 15 mm | Check clearance for the material you intend to shape. |
| Flange width / thickness | 3 / 2 mm | Creates a broader grip above the thin wall. |
Smooth the input outline or increase its size. A nozzle cannot follow details smaller than its printed line.
Use a source with one dominant silhouette. The largest exterior contour is selected; isolated decorative details may be ignored.
No food-safety certification is provided. Material labeling alone does not establish safety of a finished printed object. Use a suitable food-contact process and obtain advice appropriate to your application.
No. The optional stamp is based on an inset outline, not a full trace of internal artwork.
The geometry can be useful for non-food shaping. Test fit and strength for the material and keep craft tools separate from food-contact tools.
This tool models the largest exterior contour. Prepare and export separate silhouettes individually.