A slim blade with the whole flower above the page edge. Adjust the length.
More templatesDaisy tab: a 0.8 mm rounded page blade with a raised flower centre only on the head. Keep the whole flower above the page edge; print flat and test page comfort and bending before use. One-colour printing needs no filament change. For two colours change above Z 0.8 mm (first accent layer Z 1.0 mm at 0.2 mm layers). Faux organza uses a thin printed fill; fabric insert leaves open cells for your own fabric. For fabric, inspect the layers and insert a pause just before the upper lines begin. STL cannot store a pause. Fabric and adhesive are not included. Physical samples are unverified.
This generated model has not been physically test-printed. Inspect fit and thin details in your slicer.
Free STL & 3MF downloads · personal use · no account needed
3MF keeps named parts aligned. It does not include filament assignments or printer settings. Choose a file format →
Open the file in your slicer, check the scale and thin details, then choose settings for your printer and material.
A slim blade with the whole flower above the page edge. Adjust the length. This design belongs to just one more chapter: a flower above the page, a tiny bookcase or a sunset in fine printed lines. Begin with this arrangement, then use the editor to change the available lettering, dimensions or artwork. The preview and the STL are generated from the same model settings. Check the complete dimensions after editing, because changing a name, shape or size can change the footprint and the smallest printable details. Download the finished geometry, rather than treating the display colours as slicer instructions.
Print flat with the plain back on the plate. A 0.20 mm layer height gives four layers across the blade and two additional layers at the flower centre. Start with a single colour. For a contrasting centre, inspect the layer preview and add a filament change above the 0.8 mm base; the first accent layer is at Z 1.0 mm. STL contains geometry, not filament changes or a printer profile. Use your own printer and material settings rather than copying machine instructions from another printer.
Physical acceptance is still pending. Check that the blade lies flat, the edges do not catch paper and the flower-to-blade connection survives ordinary handling. Keep the entire flower outside the book. Do not force a thick object into a tightly bound volume or repeatedly bend PLA. If the print curls, splits or leaves a mark on paper, stop using it and adjust the design or settings before printing another.